Title :	Piping and Valves	Doc. No.	L-001	Annex:	B	Class	FC11
Project : NORSOK		Company :		Rev.Date :	20.09.99	Rev. :	3

Max Design Pressure at Temperature Pressure (Barg) 255.3 255.3 250.4 231.9 226.1 Temperature (Deg. C) -46 38 50 100 150

Rating CL 1500 Branch Table NBR3 Service Code N-C200

Design Code	ASME B31.3
Corr. Allow.	3.0
Wall Thickness Under Tolerance	<=24"=12.5%, >24"=0.3mm, SEE NOTE 2
Longitudinal Weld Efficiency	1

ND (inch)	0.50	0.75	1.00	1.50	2.00	3.00	4.00	6.00	8.00	10.00	12.00	14.00	16.00	18.00	20.00	24.00	30.00	36.00
OD (mm)	21.3	26.7	33.4	48.3	60.3	88.9	114.3	168.3	219.1	273.1	323.8	355.6	406.4	457.0	508.0	610.0	762.0	914.0
THK (mm)	7.47	7.82	9.09	10.15	11.07	15.24	17.12	21.95	25.00	28.58	33.32	35.71	40.49	45.24	50.01	59.54	65.00	75.00
SCH										160	160	160	160	160	160	160
WEIGHT	XXS	XXS	XXS	XXS	XXS	XXS	XXS	XXS

ITEM TYPE	RANGE FROM TO		GEOMETRIC STANDARD	EDS/ VDS	END CONN #1 #2		MATERIAL DESCR.	MDS	RATING	SCHD.	NOTES
PIPE	0.50	6.00	ASME B36.10M		PE	PE	A333 6 SMLS	C11
PIPE	8.00	8.00	ISO 4200		PE	PE	API 5L GrX52	C22
PIPE	10.00	24.00	ASME B36.10M		PE	PE	API 5L GrX52	C22
PIPE	30.00	36.00	ISO 4200		PE	PE	A671 CC70 CL22	C11
PIPE NIPPLE 100MM LONG	0.50	1.00	ASME B36.10M		TE	PE	A333 6 SMLS	C11
BENDING	0.50	36.00	MADE FROM PIPE	NBE1
CAP	0.50	6.00	ASME B16.9		BE		A420 WPL6	C11
CAP	8.00	24.00	ASME B16.9		BE		A860 WPHY 52	C11
CAP	30.00	36.00	MSS SP-75		BE		A860 WPHY 52	C11
CONCENTRIC REDUCER	0.75	6.00	ASME B16.9		BE	BE	A420 WPL6	C11
CONCENTRIC REDUCER	8.00	24.00	ASME B16.9		BE	BE	A860 WPHY 52	C11
CONCENTRIC REDUCER	30.00	36.00	MSS SP-75		BE	BE	A860 WPHY 52	C11
ECCENTRIC REDUCER	0.75	6.00	ASME B16.9		BE	BE	A420 WPL6	C11
ECCENTRIC REDUCER	8.00	24.00	ASME B16.9		BE	BE	A860 WPHY 52	C21
ECCENTRIC REDUCER	30.00	36.00	MSS SP-75		BE	BE	A860 WPHY 52	C21
ELBOW LONG RADIUS 45 DEG	0.50	6.00	ASME B16.9		BE	BE	A420 WPL6	C11			015
ELBOW LONG RADIUS 45 DEG	8.00	24.00	ASME B16.9		BE	BE	A860 WPHY 52	C21			015
ELBOW LONG RADIUS 45 DEG	30.00	36.00	MSS SP-75		BE	BE	A860 WPHY 52	C21			015
ELBOW LONG RADIUS 90 DEG	0.50	6.00	ASME B16.9		BE	BE	A420 WPL6	C11			015
ELBOW LONG RADIUS 90 DEG	8.00	24.00	ASME B16.9		BE	BE	A860 WPHY 52	C21			015
ELBOW LONG RADIUS 90 DEG	30.00	36.00	MSS SP-75		BE	BE	A860 WPHY 52	C21			015
STRAIGHT TEE	0.50	6.00	ASME B16.9		BE	BE	A420 WPL6	C11
STRAIGHT TEE	8.00	24.00	ASME B16.9		BE	BE	A860 WPHY 52	C21
STRAIGHT TEE	30.00	36.00	MSS SP-75		BE	BE	A860 WPHY 52	C21
REDUCING TEE	0.75	6.00	ASME B16.9		BE	BE	A420 WPL6	C11
REDUCING TEE	8.00	24.00	ASME B16.9		BE	BE	A860 WPHY 52	C21
REDUCING TEE	30.00	36.00	MSS SP-75		BE	BE	A860 WPHY 52	C21
WELDOLET	2.00	6.00	NORSOK EDS	NOL1	BE	BE	A350 LF2	C11
WELDOLET	8.00	36.00	NORSOK EDS	NOL1	BE	BE	A694 F52	C21
REINFORCED NIPOFLANGE	2.00	6.00	NORSOK EDS	NOL1	BE	RJ	A350 LF2	C11
REINFORCED NIPOFLANGE	8.00	36.00	NORSOK EDS	NOL1	BE	RJ	A694 F52	C21
BLIND FLANGE	0.50	6.00	ASME B16.5		RJ		A350 LF2	C11
BLIND FLANGE	8.00	24.00	ASME B16.5		RJ		A516 Gr70	C11
WELDNECK FLANGE	0.50	6.00	ASME B16.5	NAF1	RJ	BE	A350 LF2	C11
WELDNECK FLANGE	8.00	24.00	ASME B16.5	NAF1	RJ	BE	A694 F52	C21
WELDNECK ORIFICE FLANGE	1.00	6.00	ASME B16.36	NAF1	RJ	BE	A350 LF2	C11
SPECTACLE BLIND	0.50	8.00	NORSOK EDS	NLB1	RJ	RJ	A350 LF2	C11
SPECTACLE BLIND	0.50	8.00	NORSOK EDS	NLB1	RJ	RJ	A516 Gr70	C11
SPADE	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A516 Gr70	C11
SPACER	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A516 Gr70	C11
GASKET OVAL RING	0.50	24.00	ASME B16.20				SOFT IRON
MECHANICAL JOINT BLIND HUB	2.00	6.00	MANUFACTURERS STANDARD	NMJ1			A350 LF2	C11
MECHANICAL JOINT BLIND HUB	8.00	8.00	MANUFACTURERS STANDARD	NMJ3			A694 F52	C21
MECHANICAL JOINT BLIND HUB	10.00	24.00	MANUFACTURERS STANDARD	NMJ1			A694 F52	C21
MECHANICAL JOINT HUB	2.00	6.00	MANUFACTURERS STANDARD	NMJ1	BE		A350 LF2	C11
MECHANICAL JOINT HUB	8.00	8.00	MANUFACTURERS STANDARD	NMJ3	BE		A694 F52	C21
MECHANICAL JOINT HUB	10.00	24.00	MANUFACTURERS STANDARD	NMJ1	BE		A694 F52	C21
MECHANICAL JOINT CLAMP	2.00	6.00	MANUFACTURERS STANDARD	NMJ1			A788 AISI 4140	X02			061
MECHANICAL JOINT CLAMP	8.00	8.00	MANUFACTURERS STANDARD	NMJ3			A788 AISI 4140	X02			061
MECHANICAL JOINT CLAMP	10.00	24.00	MANUFACTURERS STANDARD	NMJ1			A788 AISI 4140	X02			061
MECHANICAL JOINT SEAL RING	2.00	6.00	MANUFACTURERS STANDARD	NMJ1			AISI 4140
MECHANICAL JOINT SEAL RING	8.00	8.00	MANUFACTURERS STANDARD	NMJ3			AISI 4140
MECHANICAL JOINT SEAL RING	10.00	24.00	MANUFACTURERS STANDARD	NMJ1			AISI 4140
BLIND FLANGE COMPACT	2.00	36.00	MANUFACTURERS STANDARD		CJ		A694 F52	C21
COMPACT FLANGE	2.00	36.00	MANUFACTURERS STANDARD		CJ	BE	A694 F52	C21
SPACER COMPACT TYPE	2.00	6.00	MANUFACTURERS STANDARD		CJ	CJ	A350 LF2	C11
SPACER COMPACT TYPE	8.00	36.00	MANUFACTURERS STANDARD		CJ	CJ	A516 Gr70	C11
HEX HEAD PLUG	0.50	1.00	ASME B16.11		MT		A350 LF2		6000 LBS
SPADE COMPACT TYPE	2.00	6.00	MANUFACTURERS STANDARD		CJ	CJ	A350 LF2	C11
SPADE COMPACT TYPE	8.00	36.00	MANUFACTURERS STANDARD		CJ	CJ	A516 Gr70	C11
STUD BOLT C/W NUTS	0.50	36.00	ASME B16.5	NBO1			A193 B7/A194 2H
HEX HEAD SCREW	2.00	36.00	MANUFACTURERS STANDARD				A193 B7/A194 2H
SEAL RING FOR COMPACT FLANGE	2.00	36.00	MANUFACTURERS STANDARD		CJ	CJ	MAN. STD
BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFC61C	CL	CL			CL 1500
BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFC61J	RJ	RJ			CL 1500
BALL VALVE METAL SEAT FULL BORE	2.00	36.00		BLFC61K	CJ	CJ			CL 1500
BALL VALVE METAL SEAT FULL BORE TOP ENTRY	2.00	36.00		BLFC61B	BE	BE			CL 1500
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFC51C	CL	CL			CL 1500
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFC51J	RJ	RJ			CL 1500
BALL VALVE METAL SEAT REDUCED BORE	3.00	36.00		BLFC51K	CJ	CJ			CL 1500
BALL VALVE METAL SEAT REDUCED BORE TOP ENTRY	3.00	36.00		BLFC51B	BE	BE			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFC81C	CL	CL			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFC81J	RJ	RJ			CL 1500
BALL VALVE NON CONTACT	2.00	36.00		BLFC81B	BE	BE			CL 1500
BALL VALVE NON CONTACT	2.00	36.00		BLFC81K	CJ	CJ			CL 1500
BALL VALVE REDUCED BORE	3.00	24.00		BLFC31J	RJ	RJ			CL 1500		074
BALL VALVE REDUCED BORE TOP ENTRY	3.00	24.00		BLFC31B	BE	BE			CL 1500		074
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFC71C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFC71J	RJ	RJ			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	36.00		GTFC71B	BE	BE			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	36.00		GTFC71K	CJ	CJ			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING REVERSED PORT	2.00	24.00		GTFC73C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFC41C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFC41J	RJ	RJ			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	36.00		GTFC41B	BE	BE			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	36.00		GTFC41K	CJ	CJ			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB REVERSED PORT	2.00	24.00		GTFC43C	CL	CL			CL 1500		069
GATE VALVE WEDGE	0.50	1.00		GTFC05D	BE	FT			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFC05B	BE	BE			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFC01J	RJ	RJ			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFC11C	CL	CL			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFC11J	RJ	RJ			CL 1500
GATE VALVE WEDGE	2.00	36.00		GTFC11B	BE	BE			CL 1500
GATE VALVE WEDGE	2.00	36.00		GTFC11K	CJ	CJ			CL 1500
GLOBE VALVE SWIVELLING	0.50	1.50		GBFC05B	BE	BE			CL 1500
GLOBE VALVE SWIVELLING	0.50	1.50		GBFC01J	RJ	RJ			CL 1500
GLOBE VALVE SWIVELLING	2.00	6.00		GBFC11B	BE	BE			CL 1500
GLOBE VALVE SWIVELLING	2.00	6.00		GBFC11J	RJ	RJ			CL 1500
CHECK VALVE DUAL WAFER	2.00	24.00		CHFC51C	CL	CL			CL 1500
CHECK VALVE DUAL WAFER	2.00	24.00		CHFC51J	RJ	RJ			CL 1500
CHECK VALVE PISTON	0.50	1.50		CHFC05B	BE	BE			CL 1500
CHECK VALVE PISTON	0.50	1.50		CHFC01J	RJ	RJ			CL 1500
PLUG VALVE	2.00	24.00		PGFC41B	BE	BE			CL 1500
PLUG VALVE	2.00	24.00		PGFC41K	CJ	CJ			CL 1500
PLUG VALVE	2.00	24.00		PGFC41C	CL	CL			CL 1500
PLUG VALVE	2.00	24.00		PGFC41J	RJ	RJ			CL 1500
DOUBLE BLOCK AND BLEED	0.75	0.75		CBFC01D	RJ	FT			CL 1500
DOUBLE BLOCK AND BLEED	1.00	3.00		CBFC11J	RJ	RJ			CL 1500

Notes :

001	REF. SECTION 6 FOR SERVICES REQUIRING NACE MR0175.
002	THE WALL THICKNESS TOLERANCE IS USED FOR DESIGN AND IS NOT PART OF THE PURCHASE SPECIFICATION WHEN DEVIATING FROM THE INDIVIUAL PIPING ITEMS.
015	USE MINIMUM 3 X DIA. BENDS OR BENDING FOR FLOWLINES.
061	CLAMP TYPE MECHANICAL JOINT IS LIMITED TO -30 DEG C.
063	FOR CLAMP TYPE LINE BLINDS, USE INTEGRAL WITH SEAL RING TYPE AS DESIGNED BY MANUFACTURER.
069	FOR GAS SERVICE IS SEAT SKIRT NOT NECESSARY.
074	MAX. 120 DEG C.