| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GTFC41C |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GATE VALVE THROUGH CONDUIT SLAB | ASME B16.10 | CL | CL | |
2.00 | 6.00 | 020,040 |
| GATE VALVE THROUGH CONDUIT SLAB | ASME B16.10 | CL | CL | |
8.00 | 8.00 | 022,040 |
| GATE VALVE THROUGH CONDUIT SLAB | ASME B16.10 | CL | CL | |
10.00 | 24.00 | 020,040 |
| Notes | ||
| Pressure Rating | CL 1500 | |
| Design Code | API 6D | 130 |
| General Requirement | VSK V403 | |
| Leak Test | VSK V404 | |
| Marking | VSK V003 | |
| Operator | VSK V401 | |
| Max Design Pressure | Barg | 255.3 | 255.3 | 250.4 | 231.9 | 226.1 | 219.1 | 208.6 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 | 150 | 200 | 250 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet | A352 LCC A350 LF2 |
C12 C11 |
|
| INSIDE TRIM | Bi-directional sealing (by seal on both sides of slab). Gate shall be open in stem rised position | |
|
|
| PORT | Full bore, through conduit | |
|
|
| STEM | Rising stem. Outside screw and yoke; Material according to EDS | |
|
NTR1 |
| CLOSURE MEMBER | Slab gate; Material according to EDS | |
|
NHF1 NTR1 |
| SEATS | Floating seats, pressure energized with spring for sealing at low pressure; Material according to EDS | |
|
NHF1 NTR1 |
| SEALS | Packed gland | |
|
|
| STEM PACKING | Expanded graphite not less than 98% purity, or firesafe design according to manufacturer's standard | |
|
|
| OUTSIDE TRIM | Cavity external bleed plug | |
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
|
|
|
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 020 | END TYPE ACCORDING TO EDS: NMJ1. |
| 022 | END TYPE ACCORDING TO EDS: NMJ3. |
| 040 | END TO END DIMENSION AS FOR LONG PATTERN, RTJ. |
| 130 | DESIGN SHALL ALSO COMPLY TO ASME B16.34. |