Piping Class : FD20

Title :	Piping and Valves	Doc. No.	L-001	Annex:	B	Class	FD20
Project : NORSOK		Company :		Rev.Date :	20.09.99	Rev. :	3

Max Design Pressure at Temperature
Pressure (Barg)	258.6	258.5	256.3	245.9	228.9	213.1	200.9
Temperature (Deg. C)	-46	38	50	100	150	200	250

Rating	CL 1500
Branch Table	NBR3
Service Code	N-D200

Design Code	ASME B31.3
Corr. Allow.	0.0
Wall Thickness Under Tolerance	<=14"=12.5%, >14"=0.3mm, SEE NOTE 2
Longitudinal Weld Efficiency	1

ND (inch)	0.50	0.75	1.00	1.50	2.00	3.00	4.00	6.00	8.00	10.00	12.00	14.00	16.00	18.00	20.00	24.00
OD (mm)	21.3	26.7	33.4	48.3	60.3	88.9	114.3	168.3	219.1	273.1	323.8	355.6	406.4	457.0	508.0	610.0
THK (mm)	2.77	2.87	3.38	3.68	5.54	7.62	8.56	14.27	18.26	21.44	25.40	27.79	26.19	29.36	32.54	38.89
SCH	40S	40S	40S	40S	80S	80S	80S	120	120	120	120	120	100	100	100	100
WEIGHT											XXS

ITEM TYPE	RANGE FROM TO		GEOMETRIC STANDARD	EDS/ VDS	END CONN #1 #2		MATERIAL DESCR.	MDS	RATING	SCHD.	NOTES
PIPE	0.50	4.00	ASME B36.19M		PE	PE	A790 S31803 SMLS	D41
PIPE	6.00	14.00	ASME B36.10M		PE	PE	A790 S31803 SMLS	D41
PIPE	8.00	24.00	ASME B36.10M		PE	PE	A928 S31803 CL1 OR 3	D42
PIPE NIPPLE 100MM LONG	0.50	1.00	ASME B36.19M		TE	PE	A790 S31803 SMLS	D41		XXS
BENDING	0.50	24.00	MADE FROM PIPE	NBE1
CAP	0.50	14.00	ASME B16.9		BE		A815 S31803 S	D43
CAP	16.00	24.00	MSS SP-75		BE		A815 S31803 S	D43
CONCENTRIC REDUCER	0.75	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
CONCENTRIC REDUCER	16.00	24.00	MSS SP-75		BE	BE	A815 S31803 WX	D43
ECCENTRIC REDUCER	0.75	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
ECCENTRIC REDUCER	16.00	24.00	MSS SP-75		BE	BE	A815 S31803 WX	D43
ELBOW LONG RADIUS 45 DEG	0.50	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
ELBOW LONG RADIUS 45 DEG	16.00	24.00	MSS SP-75		BE	BE	A815 S31803 WX	D43
ELBOW LONG RADIUS 90 DEG	0.50	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
ELBOW LONG RADIUS 90 DEG	16.00	24.00	MSS SP-75		BE	BE	A815 S31803 WX	D43
STRAIGHT TEE	0.50	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
STRAIGHT TEE	16.00	24.00	MSS SP-75		BE	BE	A815 S31803 WX	D43
REDUCING TEE	0.75	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
REDUCING TEE	16.00	24.00	MSS SP-75		BE	BE	A815 S31803 WX	D43
WELDOLET	2.00	24.00	NORSOK EDS	NOL1	BE	BE	A182 F51	D44
REINFORCED NIPOFLANGE	0.75	24.00	NORSOK EDS	NOL1	BE	RJ	A182 F51	D44
BLIND FLANGE	0.50	24.00	ASME B16.5		RJ		A182 F51	D44
BLIND FLANGE	0.50	24.00	ASME B16.5		RJ		A240 S31803	D45
WELDNECK FLANGE	0.50	24.00	ASME B16.5	NAF1	RJ	BE	A182 F51	D44
WELDNECK ORIFICE FLANGE	1.00	6.00	ASME B16.36	NAF1	RJ	BE	A182 F51	D44
SPECTACLE BLIND	0.50	8.00	NORSOK EDS	NLB1	RJ	RJ	A182 F51	D44
SPECTACLE BLIND	0.50	8.00	NORSOK EDS	NLB1	RJ	RJ	A240 S31803	D45
SPADE	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A182 F51	D44
SPADE	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A240 S31803	D45
SPACER	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A182 F51	D44
SPACER	10.00	24.00	NORSOK EDS	NLB1	RJ	RJ	A240 S31803	D45
GASKET OCTAGONAL RING	0.50	24.00	ASME B16.20	NGA3			6MO
MECHANICAL JOINT BLIND HUB	2.00	24.00	MANUFACTURERS STANDARD	NMJ1			A182 F51	D44
MECHANICAL JOINT HUB	2.00	24.00	MANUFACTURERS STANDARD	NMJ1	BE		A182 F51	D44
MECHANICAL JOINT CLAMP	2.00	24.00	MANUFACTURERS STANDARD	NMJ1			A788 AISI 4140	X02			061
MECHANICAL JOINT SEAL RING	2.00	24.00	MANUFACTURERS STANDARD	NMJ1			17-4 PH PTFE COAT	D44
BLIND FLANGE COMPACT	2.00	24.00	MANUFACTURERS STANDARD		CJ		A182 F51	D44
COMPACT FLANGE	2.00	24.00	MANUFACTURERS STANDARD		CJ	BE	A182 F51	D44
SPACER COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A182 F51	D44			063
SPACER COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A240 S31803	D45			063
HEX HEAD PLUG	0.50	1.00	ASME B16.11		MT		A182 F51		6000 LBS
SPADE COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A182 F51	D44			063
SPADE COMPACT TYPE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	A240 S31803	D45			063
STUD BOLT C/W NUTS	0.50	24.00	ASME B16.5	NBO1			A193 B7/A194 2H
SEAL RING FOR COMPACT FLANGE	2.00	24.00	MANUFACTURERS STANDARD		CJ	CJ	17-4 PH PTFE COAT


BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFD60K	CJ	CJ			CL 1500		076
BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFD60C	CL	CL			CL 1500		076
BALL VALVE METAL SEAT FULL BORE	2.00	24.00		BLFD60J	RJ	RJ			CL 1500		076
BALL VALVE METAL SEAT FULL BORE TOP ENTRY	2.00	24.00		BLFD60B	BE	BE			CL 1500		076
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFD50K	CJ	CJ			CL 1500		076
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFD50C	CL	CL			CL 1500		076
BALL VALVE METAL SEAT REDUCED BORE	3.00	24.00		BLFD50J	RJ	RJ			CL 1500		076
BALL VALVE METAL SEAT REDUCED BORE TOP ENTRY	3.00	24.00		BLFD50B	BE	BE			CL 1500		076
BALL VALVE NON CONTACT	2.00	24.00		BLFD80B	BE	BE			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFD80K	CJ	CJ			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFD80C	CL	CL			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLFD80J	RJ	RJ			CL 1500
BALL VALVE REDUCED BORE	3.00	24.00		BLFD30J	RJ	RJ			CL 1500		074
BALL VALVE REDUCED BORE TOP ENTRY	3.00	24.00		BLFD30B	BE	BE			CL 1500		074
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD70B	BE	BE			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD70K	CJ	CJ			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD70C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	24.00		GTFD70J	RJ	RJ			CL 1500		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING REVERSED PORT	2.00	24.00		GTFD72C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD40B	BE	BE			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD40K	CJ	CJ			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD40C	CL	CL			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	24.00		GTFD40J	RJ	RJ			CL 1500		069
GATE VALVE THROUGH CONDUIT SLAB REVERSED PORT	2.00	24.00		GTFD42C	CL	CL			CL 1500		069
GATE VALVE WEDGE	0.50	1.00		GTFD00D	BE	FT			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFD00B	BE	BE			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFD00J	RJ	RJ			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD10B	BE	BE			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD10K	CJ	CJ			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD10C	CL	CL			CL 1500
GATE VALVE WEDGE	2.00	24.00		GTFD10J	RJ	RJ			CL 1500
GLOBE VALVE SWIVELLING	0.50	1.50		GBFD00B	BE	BE			CL 1500
GLOBE VALVE SWIVELLING	0.50	1.50		GBFD00J	RJ	RJ			CL 1500
GLOBE VALVE SWIVELLING	2.00	6.00		GBFD10B	BE	BE			CL 1500
GLOBE VALVE SWIVELLING	2.00	6.00		GBFD10J	RJ	RJ			CL 1500
CHECK VALVE DUAL WAFER	2.00	24.00		CHFD50C	CL	CL			CL 1500
CHECK VALVE DUAL WAFER	2.00	24.00		CHFD50J	RJ	RJ			CL 1500
CHECK VALVE PISTON	0.50	1.50		CHFD00B	BE	BE			CL 1500
CHECK VALVE PISTON	0.50	1.50		CHFD00J	RJ	RJ			CL 1500
PLUG VALVE	2.00	24.00		PGFD40B	BE	BE			CL 1500
PLUG VALVE	2.00	24.00		PGFD40K	CJ	CJ			CL 1500
PLUG VALVE	2.00	24.00		PGFD40C	CL	CL			CL 1500
PLUG VALVE	2.00	24.00		PGFD40J	RJ	RJ			CL 1500
DOUBLE BLOCK AND BLEED	0.75	1.00		CBFD00D	RJ	FT			CL 1500		074
DOUBLE BLOCK AND BLEED	1.00	3.00		CBFD10J	RJ	RJ			CL 1500		074

Notes :

001	REF. SECTION 6 FOR SERVICES REQUIRING NACE MR0175.
002	THE WALL THICKNESS TOLERANCE IS USED FOR DESIGN AND IS NOT PART OF THE PURCHASE SPECIFICATION WHEN DEVIATING FROM THE INDIVIUAL PIPING ITEMS.
007	IF THE OPERATIONAL TEMP. IS ABOVE 110 DEG C, SPECIAL CARE SHALL BE TAKEN TO AVOID CHLORIDE STRESS CORROSION CRACKING.
015	USE MINIMUM 3 X DIA. BENDS OR BENDING FOR FLOWLINES.
018	FOR SIZES ABOVE 4" EROSION ALLOWANCE = 1
061	CLAMP TYPE MECHANICAL JOINT IS LIMITED TO -30 DEG C.
063	FOR CLAMP TYPE LINE BLINDS, USE INTEGRAL WITH SEAL RING TYPE AS DESIGNED BY MANUFACTURER.
069	FOR GAS SERVICE IS SEAT SKIRT NOT NECESSARY.
074	MAX. 120 DEG C.
076	MAX. 200 DEG C.