Piping Class : ED20

Title :	Piping and Valves	Doc. No.	L-001	Annex:	B	Class	ED20
Project : NORSOK		Company :		Rev.Date :	20.09.99	Rev. :	3

Max Design Pressure at Temperature
Pressure (Barg)	155.1	155.1	153.8	147.6	137.3	128.0	120.7
Temperature (Deg. C)	-46	38	50	100	150	200	250

Rating	CL 900
Branch Table	NBR3
Service Code	N-D200

Design Code	ASME B31.3
Corr. Allow.	0.0
Wall Thickness Under Tolerance	12.5% <=14", 0.3mm >14", SEE NOTE 2
Longitudinal Weld Efficiency	1

ND (inch)	0.50	0.75	1.00	1.50	2.00	3.00	4.00	6.00	8.00	10.00	12.00	14.00	16.00	18.00	20.00	24.00	30.00	36.00
OD (mm)	21.3	26.7	33.4	48.3	60.3	88.9	114.3	168.3	219.1	273.1	323.8	355.6	406.4	457.0	508.0	610.0	762.0	914.0
THK (mm)	2.77	2.87	3.38	3.68	3.91	5.49	6.02	7.11	10.31	12.70	14.27	15.09	16.66	19.05	20.62	24.61	28.00	36.00
SCH	40S	40S	40S	40S	40S	40S	40S	40S	60	60	60	60	60	60	60	60
WEIGHT										XS

ITEM TYPE	RANGE FROM TO		GEOMETRIC STANDARD	EDS/ VDS	END CONN #1 #2		MATERIAL DESCR.	MDS	RATING	SCHD.	NOTES
PIPE	0.50	6.00	ASME B36.19M		PE	PE	A790 S31803 SMLS	D41
PIPE	4.00	6.00	ASME B36.19M		PE	PE	A928 S31803 CL1 OR 3	D42
PIPE	8.00	18.00	ASME B36.10M		PE	PE	A790 S31803 SMLS	D41
PIPE	8.00	24.00	ASME B36.10M		PE	PE	A928 S31803 CL1 OR 3	D42
PIPE	30.00	36.00	ISO 4200		PE	PE	A928 S31803 CL1 OR 3	D42
PIPE NIPPLE 100MM LONG	0.50	0.75	ASME B36.19M		TE	PE	A790 S31803 SMLS	D41		80S
BENDING	0.50	36.00	MADE FROM PIPE	NBE1
CAP	0.50	14.00	ASME B16.9		BE		A815 S31803 S	D43
CAP	16.00	36.00	MSS SP-75		BE		A815 S31803 S	D43
CONCENTRIC REDUCER	0.75	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
CONCENTRIC REDUCER	16.00	36.00	MSS SP-75		BE	BE	A815 S31803 S/WX	D43
ECCENTRIC REDUCER	0.75	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
ECCENTRIC REDUCER	16.00	36.00	MSS SP-75		BE	BE	A815 S31803 S/WX	D43
ELBOW LONG RADIUS 45 DEG	0.50	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
ELBOW LONG RADIUS 45 DEG	16.00	36.00	MSS SP-75		BE	BE	A815 S31803 S/WX	D43
ELBOW LONG RADIUS 90 DEG	0.50	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
ELBOW LONG RADIUS 90 DEG	16.00	36.00	MSS SP-75		BE	BE	A815 S31803 S/WX	D43
STRAIGHT TEE	0.75	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
STRAIGHT TEE	16.00	36.00	MSS SP-75		BE	BE	A815 S31803 S/WX	D43
REDUCING TEE	0.75	14.00	ASME B16.9		BE	BE	A815 S31803 S/WX	D43
REDUCING TEE	16.00	36.00	MSS SP-75		BE	BE	A815 S31803 S/WX	D43
WELDOLET	2.00	36.00	NORSOK EDS	NOL1	BE	BE	A182 F51	D44
REINFORCED NIPOFLANGE	2.00	36.00	NORSOK EDS	NOL1	BE	RJ	A182 F51	D44	CL 1500
BLIND FLANGE	0.50	2.00	ASME B16.5		RJ		A182 F51	D44	CL 1500
BLIND FLANGE	0.50	2.00	ASME B16.5		RJ		A240 S31803	D45	CL 1500
BLIND FLANGE	3.00	24.00	ASME B16.5		RJ		A182 F51	D44
BLIND FLANGE	3.00	24.00	ASME B16.5		RJ		A240 S31803	D45
BLIND FLANGE	30.00	36.00	MSS SP-44		RJ		A182 F51	D44
BLIND FLANGE	30.00	36.00	MSS SP-44		RJ		A240 S31803	D45
WELDNECK FLANGE	0.50	2.00	ASME B16.5	NAF1	RJ	BE	A182 F51	D44	CL 1500
WELDNECK FLANGE	3.00	24.00	ASME B16.5	NAF1	RJ	BE	A182 F51	D44
WELDNECK FLANGE	30.00	36.00	MSS SP-44	NAF1	RJ	BE	A182 F51	D44
WELDNECK ORIFICE FLANGE	1.00	2.00	ASME B16.36	NAF1	RJ	BE	A182 F51	C11	CL 1500
WELDNECK ORIFICE FLANGE	3.00	12.00	ASME B16.36	NAF1	RJ	BE	A182 F51	C11
SPECTACLE BLIND	0.50	2.00	NORSOK EDS	NLB1	RJ	RJ	A182 F51	D44	CL 1500
SPECTACLE BLIND	0.50	2.00	NORSOK EDS	NLB1	RJ	RJ	A240 S31803	D45	CL 1500
SPECTACLE BLIND	3.00	8.00	NORSOK EDS	NLB1	RJ	RJ	A182 F51	D44
SPECTACLE BLIND	3.00	8.00	NORSOK EDS	NLB1	RJ	RJ	A240 S31803	D45
SPADE	10.00	36.00	NORSOK EDS	NLB1	RJ	RJ	A182 F51	D44
SPADE	10.00	36.00	NORSOK EDS	NLB1	RJ	RJ	A240 S31803	D45
SPACER	10.00	36.00	NORSOK EDS	NLB1	RJ	RJ	A182 F51	D44
SPACER	10.00	36.00	NORSOK EDS	NLB1	RJ	RJ	A240 S31803	D45
GASKET OCTAGONAL RING	0.50	36.00	ASME B16.20				AISI 316
HEX HEAD PLUG	0.50	1.00	ASME B16.11		MT		A182 F51	D44	6000 LBS
STUD BOLT C/W NUTS	0.50	36.00	ASME B16.5	NBO1			A193 B7/A194 2H


BALL VALVE METAL SEAT FULL BORE	2.00	2.00		BLFD60J	RJ	RJ			CL 1500		076
BALL VALVE METAL SEAT FULL BORE	3.00	36.00		BLED60J	RJ	RJ			CL 900		076
BALL VALVE METAL SEAT FULL BORE TOP ENTRY	2.00	36.00		BLED60B	BE	BE			CL 900		076
BALL VALVE METAL SEAT REDUCED BORE	3.00	36.00		BLED50J	RJ	RJ			CL 900		076
BALL VALVE METAL SEAT REDUCED BORE TOP ENTRY	3.00	36.00		BLED50B	BE	BE			CL 900		076
BALL VALVE NON CONTACT	2.00	2.00		BLFD80J	RJ	RJ			CL 1500
BALL VALVE NON CONTACT	2.00	24.00		BLED80B	BE	BE			CL 900
BALL VALVE NON CONTACT	3.00	24.00		BLED80J	RJ	RJ			CL 900
BALL VALVE REDUCED BORE	3.00	24.00		BLED30J	RJ	RJ			CL 900		075
BALL VALVE REDUCED BORE TOP ENTRY	3.00	24.00		BLED30B	BE	BE			CL 900		075
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	2.00	36.00		GTED70B	RJ	RJ			CL 900		069
GATE VALVE THROUGH CONDUIT DOUBLE EXPANDING	3.00	36.00		GTED70J	RJ	RJ			CL 900		069
GATE VALVE THROUGH CONDUIT SLAB	2.00	36.00		GTED40B	BE	BE			CL 900		069
GATE VALVE THROUGH CONDUIT SLAB	3.00	36.00		GTED40J	RJ	RJ			CL 900		069
GATE VALVE WEDGE	0.50	1.00		GTFD00D	BE	FT			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFD00B	BE	BE			CL 1500
GATE VALVE WEDGE	0.50	1.50		GTFD00J	RJ	RJ			CL 1500
GATE VALVE WEDGE	2.00	2.00		GTFD10J	RJ	RJ			CL 1500
GATE VALVE WEDGE	2.00	36.00		GTED10B	BE	BE			CL 900
GATE VALVE WEDGE	3.00	36.00		GTED10J	RJ	RJ			CL 900
GLOBE VALVE SWIVELLING	0.50	1.50		GBFD00B	BE	BE			CL 1500
GLOBE VALVE SWIVELLING	0.50	1.50		GBFD00J	RJ	RJ			CL 1500
GLOBE VALVE SWIVELLING	2.00	2.00		GBFD10J	RJ	RJ			CL 1500
GLOBE VALVE SWIVELLING	2.00	6.00		GBED10B	BE	BE			CL 900
GLOBE VALVE SWIVELLING	3.00	6.00		GBED10J	RJ	RJ			CL 900
CHECK VALVE DUAL WAFER	2.00	24.00		CHED50J	RJ	RJ			CL 900
CHECK VALVE PISTON	0.50	1.50		CHFD00B	BE	BE			CL 1500
CHECK VALVE PISTON	0.50	1.50		CHFD00J	RJ	RJ			CL 1500
PLUG VALVE	2.00	2.00		PGFD40J	RJ	RJ			CL 1500
PLUG VALVE	2.00	24.00		PGED40B	BE	BE			CL 900
PLUG VALVE	3.00	24.00		PGED40J	RJ	RJ			CL 900
DOUBLE BLOCK AND BLEED	0.75	1.00		CBFD00D	RJ	FT			CL 1500		075
DOUBLE BLOCK AND BLEED	1.00	2.00		CBFD10J	RJ	RJ			CL 1500		075

Notes :

001	REF. SECTION 6 FOR SERVICES REQUIRING NACE MR0175.
002	THE WALL THICKNESS TOLERANCE IS USED FOR DESIGN AND IS NOT PART OF THE PURCHASE SPECIFICATION WHEN DEVIATING FROM THE INDIVIUAL PIPING ITEMS.
007	IF THE OPERATIONAL TEMP. IS ABOVE 110 DEG C, SPECIAL CARE SHALL BE TAKEN TO AVOID CHLORIDE STRESS CORROSION CRACKING.
069	FOR GAS SERVICE IS SEAT SKIRT NOT NECESSARY.
075	MAX. 150 DEG C.
076	MAX. 200 DEG C.