| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | PGDD41J |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| PLUG VALVE | ASME B16.10 | RJ | RJ | ASME B16.5 | 2.00 | 24.00 | |
| Notes | ||
| Pressure Rating | CL 600 | |
| Design Code | API 599 | 134 |
| Fire Test | API 6FA OR BS 6755 | |
| General Requirement | VSK V407 | |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V004 | |
| Max Design Pressure | Barg | 103.4 | 103.4 | 102.5 | 98.4 | 91.6 | 85.4 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 | 150 | 200 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet | A890 J93404 A182 S32750 |
D56 D54 |
|
| INSIDE TRIM | |
|
|
|
| PORT | Size 2.0 - 12.0: Regular pattern, size 14.0 - 24.0: Venturi pattern | |
|
|
| STEM | |
A182 S32750 | D54 | NIP1 |
| CLOSURE MEMBER | Pressure balanced plug. Designed for lubrication and selant injection | A182 S32750 | D54 | NIP1 |
| SEALS | Packed gland for stem sealing; Expanded graphite not less than 98% purity, or firesafe to manufacturer's standard | |
|
|
| LIP SEAL | |
|
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 134 | SIZES >12" SHALL COMPLY TO ASME B16.34 AND ALL REQUIREMENTS IN API 599 WHICH ARE NOT SIZE DEPENDENT. |