| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | PGAR48R |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 2 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| PLUG VALVE | ASME B16.10 | RF | RF | ASME B16.5 | 2.00 | 24.00 | |
| Notes | ||
| Pressure Rating | CL 150 | |
| Design Code | API 599 | |
| General Requirement | VSK V407 | |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V004 | |
| Low Temp. Appl. | VSK V408 | |
| Max Design Pressure | Barg | 20.0 | 20.0 | 19.5 | 17.7 | 15.8 | 14.0 | 12.1 | 10.2 |
| At Temperature | Deg. C | -101 | 38 | 50 | 100 | 150 | 200 | 250 | 300 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet; Hardfacing on body seal face and bore (min. 25% of plug bore diam. from plug) | ASTM A351 CK-3MCuN A182 F44 |
R16 R14 |
|
| INSIDE TRIM | |
|
|
NHF1 |
| PORT | Size 2.0 - 3.0: Short pattern, size 4.0 - 24.0: Regular pattern | |
|
|
| STEM | |
A182 F44 | R14 | NIP1 |
| CLOSURE MEMBER | Pressure balanced plug. Designed for lubrication and selant injection; Hardfacing on plug/plug bore | A182 F44 | R14 | NHF1 NIP1 |
| SEALS | Lip seal or packed gland (PTFE based); Material according to EDS | |
|
NSM1 |
| LIP SEAL | Material according to EDS | |
|
NSM1 |
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|