| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GTDR40J |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GATE VALVE THROUGH CONDUIT SLAB | API 6D | RJ | RJ | ASME B16.5 | 2.00 | 24.00 | |
| GATE VALVE THROUGH CONDUIT SLAB | API 6D | RJ | RJ | MSS SP-44 | 30.00 | 36.00 | |
| Notes | ||
| Pressure Rating | CL 600 | |
| Design Code | API 6D | 130 |
| General Requirement | VSK V403 | |
| Leak Test | VSK V404 | |
| Marking | VSK V003 | |
| Operator | VSK V401 | |
| Low Temp. Appl. | VSK V408 | |
| Max Design Pressure | Barg | 103.4 | 103.4 | 102.5 | 98.4 | 91.6 | 85.4 | 80.3 | 77.6 |
| At Temperature | Deg. C | -101 | 38 | 50 | 100 | 150 | 200 | 250 | 300 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet | ASTM A351 CK-3MCuN A182 F44 |
R16 R14 |
|
| INSIDE TRIM | Bi-directional sealing (by seal on both sides of slab). Gate shall be open in stem rised position | |
|
|
| PORT | Full bore, through conduit | |
|
|
| STEM | Rising stem. Outside screw and yoke | A182 F44 | R14 | NIP1 |
| CLOSURE MEMBER | Slab gate; Hardfacing | A182 F44 | R14 | NHF1 NIP1 |
| SEATS | Floating seats, pressure energized with spring for sealing at low pressure; Hardfacing | A182 F44 | R14 | NHF1 NIP1 |
| SEALS | Packed gland | |
|
|
| STEM PACKING | Expanded graphite not less than 98% purity | |
|
|
| OUTSIDE TRIM | Cavity external bleed plug | |
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
AISI 316 AISI 304 |
|
|
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 130 | DESIGN SHALL ALSO COMPLY TO ASME B16.34. |