| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GTDD10J |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GATE VALVE WEDGE | ASME B16.10 | RJ | RJ | ASME B16.5 | 2.00 | 24.00 | |
| GATE VALVE WEDGE | ASME B16.10 | RJ | RJ | MSS SP-44 | 30.00 | 36.00 | |
| Notes | ||
| Pressure Rating | CL 600 | |
| Design Code | API 600 | 135 |
| General Requirement | VSK V402 | |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V014 | |
| Max Design Pressure | Barg | 103.4 | 103.4 | 102.5 | 98.4 | 91.6 | 85.4 | 80.3 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 | 150 | 200 | 250 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet | A890 J92205 A182 F51 |
D46 D44 |
|
| INSIDE TRIM | |
|
|
|
| PORT | |
|
|
|
| STEM | Rising stem. Outside screw and yoke | A182 F51 | D44 | NIP1 |
| CLOSURE MEMBER | Gate: Flexible wedge; For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing | A182 F51 | D44 | NHF1 NIP1 |
| SEATS | Renewable; For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing | A182 F51 | D44 | NHF1 NIP1 |
| SEALS | Packed gland | |
|
|
| STEM PACKING | Expanded graphite not less than 98% purity | |
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
AISI 316 AISI 304 |
|
|
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 135 | SIZES >24" SHALL COMPLY TO ASME B16.34 AND ALL REQUIREMENTS IN API 600 WHICH ARE NOT SIZE DEPENDENT. |