| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GTAR17R |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 2 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GATE VALVE WEDGE | ASME B16.10 | RF | RF | ASME B16.5 | 2.00 | 24.00 | |
| GATE VALVE WEDGE | ASME B16.10 | RF | RF | MSS SP-44 | 30.00 | 36.00 | |
| Notes | ||
| Pressure Rating | CL 150 | |
| Design Code | API 600 | 135 |
| General Requirement | VSK V402 | |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V014 | |
| Max Design Pressure | Barg | 20.0 | 20.0 | 19.5 | 17.7 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Bolted bonnet | ASTM A351 CK-3MCuN A182 F44 |
R16 R14 |
|
| INSIDE TRIM | |
|
|
|
| PORT | |
|
|
|
| STEM | Rising stem. Outside screw and yoke | A182 F44 | R14 | NIP1 |
| CLOSURE MEMBER | Gate: Flexible wedge; For sizes 6" and below, use material type 6Mo or Nickel alloy 625, both with hardfacing | A182 F44 | R14 | NHF6 |
| SEATS | Renewable; For sizes 6" and below, use material type 6Mo or Nickel alloy 625, both with hardfacing | A182 F44 | R14 | NHF6 |
| SEALS | Lip seal or packed gland (PTFE based); Material according to EDS | PTFE BASED | NSM1 | |
| STEM PACKING | |
|
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
AISI 316 AISI 304 |
|
|
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 135 | SIZES >24" SHALL COMPLY TO ASME B16.34 AND ALL REQUIREMENTS IN API 600 WHICH ARE NOT SIZE DEPENDENT. |