| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GBGD11B |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GLOBE VALVE SWIVELLING | ASME B16.10 | BE | BE | ASME B16.25 | 2.00 | 12.00 | |
| Notes | ||
| Pressure Rating | CL 2500 | |
| Design Code | BS 1873 | |
| General Requirement | VSK V407 | |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V014 | |
| Max Design Pressure | Barg | 430.9 | 430.8 | 427.1 | 409.9 | 381.4 | 355.3 | 334.9 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 | 150 | 200 | 250 |
| ND (inch) | 2.00 | 3.00 | 4.00 | 6.00 | 8.00 | 10.00 | 12.00 |
| OD (mm) | 60.3 | 88.9 | 114.3 | 168.3 | 219.1 | 273.1 | 323.8 |
| THK (mm) | 8.74 | 11.13 | 13.49 | 18.26 | 23.01 | 28.58 | 33.32 |
| SCH | 160 | 160 | 160 | 160 | 160 | 160 | 160 |
| WEIGHT | |
|
|
|
|
|
|
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Straight pattern, bolted | A890 J93404 A182 S32750 |
D56 D54 |
|
| INSIDE TRIM | |
|
|
|
| PORT | |
|
|
|
| STEM | Rising stem. Outside screw and yoke | A182 S32750 | D54 | NIP1 |
| CLOSURE MEMBER | Swivelling disc, plug or ball type; For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing | A182 S32750 | D54 | NHF1 NIP1 |
| SEAT | Renewable; For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing | A182 S32750 | D54 | NHF1 NIP1 |
| SEALS | Packed gland | |
|
|
| STEM PACKING | Expanded graphite not less than 98% purity, or firesafe design according to manufacturer's standard | |
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
AISI 316 AISI 304 |
|
|
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|