| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | GBDR07B |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 2 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| GLOBE VALVE SWIVELLING | ASME B16.10 | BE | BE | |
0.50 | 1.50 | |
| Notes | ||
| Pressure Rating | CL 600 | |
| Design Code | BS 5352 | |
| General Requirement | VSK V407 | |
| Leak Test | VSK V101 | |
| Marking | VSK V003 | |
| Operator | VSK V009 | |
| Max Design Pressure | Barg | 103.4 | 103.4 | 102.5 | 98.4 |
| At Temperature | Deg. C | -29 | 38 | 50 | 100 |
| ND (inch) | 0.50 | 0.75 | 1.00 | 1.50 |
| OD (mm) | 21.3 | 26.7 | 33.4 | 48.3 |
| THK (mm) | 2.77 | 2.87 | 3.38 | 3.68 |
| SCH | 40S | 40S | 40S | 40S |
| WEIGHT | |
|
|
|
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Straight pattern, bolted | A182 F44 | R14 | |
| INSIDE TRIM | |
|
|
|
| PORT | Reduced bore | |
|
|
| STEM | Rising stem. Outside screw and yoke | A182 F44 | R14 | NIP1 |
| CLOSURE MEMBER | Disc: 0.5" - 1" = swivelling needle, 1.5" = swivelling plug; For sizes 6" and below, use material type 6Mo or Nickel alloy 625, both with hardfacing | A182 F44 | R14 | NHF6 |
| SEAT | Renewable; For sizes 6" and below, use material type 6Mo or Nickel alloy 625, both with hardfacing | A182 F44 | R14 | NHF6 |
| SEALS | Lip seal or packed gland (PTFE based); Material according to EDS | |
|
NSM1 |
| STEM PACKING | |
PTFE BASED | |
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| HANDWHEEL | |
AISI 316 AISI 304 |
|
|
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|