| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | BLKD40E |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 3 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| BALL VALVE FULL BORE | |
FL SAE | FL SAE | SAE J518C CODE 62 | 0.50 | 2.00 | |
| Notes | ||
| Pressure Rating | 10000 PSI | |
| Design Code | ASME B16.34 | |
| General Requirement | VSK V405 | |
| Leak Test | VSK V404 | 300 |
| Marking | VSK V003 | |
| Operator | VSK V004 | |
| Max Design Pressure | Barg | 690.0 | 690.0 | 690.0 |
| At Temperature | Deg. C | -29 | 38 | 50 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | One piece | A182 F51 | D44 | |
| INSIDE TRIM | |
|
|
|
| PORT | Full bore | |
|
|
| STEM | |
A182 F51 | D44 | NIP1 |
| CLOSURE MEMBER | Trunnion mounted ball (solid) | A182 F51 | D44 | NIP1 |
| SEATS | |
PTFE BASED | |
|
| SPRINGS | |
|
|
|
| SEALS | Lip seal/o-ring design and fire seal or packed gland for stem sealing | |
|
|
| LIP SEAL | |
PTFE BASED | |
|
| O-RING | Material shall withstand explosive decompression in hydrocarbon service | |
|
|
| FIRE SEAL | Expanded graphite not less than 98% purity | |
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | UNS S31803 produced according to recognised bolt standard | ASTM F467-5 ASTM F467-19 ASTM F468-5 ASTM F468-19 UNS S31803 |
|
|
| SPECIAL REQUIREMENTS | |
|
|
|
| 300 | PRESSURE TEST TO BS 6755, LEAKAGE RATE A. |