Title :	Piping and Valves	Doc. No.	L-001	Annex:	E	Valve Data Sheet	BLFR80J
Project :		Company :		Rev.Date :	20.09.99	Rev. :	3

Valve Type	End To End Standard	End Type 1	End Type 2	End Standard	Size From (in)	Size To (in)	Notes
BALL VALVE NON CONTACT	ASME B16.10 LONG	RJ	RJ	ASME B16.5	2.00	16.00
BALL VALVE NON CONTACT	ASME B16.10 LONG	RJ	RJ	ASME B16.5	18.00	24.00	045

		Notes
Pressure Rating	CL 1500
Design Code	ASME B16.34
Fire Test	API 6FA OR BS 6755	280
General Requirement	VSK V405
Leak Test	VSK V404
Marking	VSK V003
Operator	VSK V004
Low Temp. Appl.	VSK V408

Max Design Pressure	Barg	258.6	258.6	256.3	245.9	228.9	213.1
At Temperature	Deg. C	-46	38	50	100	150	200

Subject/Item	Design and Material Requirement	Material	MDS	EDS
BODY/BONNET	Top entry or split body, bolted	ASTM A351 CK-3MCuN A182 F44	R16 R14
INSIDE TRIM	Metal to metal sealing. No contact or sliding action between seat and ball during rotation of ball. Sealing by mechanically imposed thrust. No elastomers
PORT	Full bore
STEM		A182 F44	R14	NIP1
CLOSURE MEMBER	Trunnion mounted ball (solid); For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing	A182 F44	R14	NHF1 NIP1
SEATS	Seat ring; For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing	A182 F44	R14	NHF1 NIP1
SPRINGS
SEALS	Packed gland (expanded graphite) or lip seal design and fire seal
LIP SEAL	Material according to EDS			NSM1
O-RING
FIRE SEAL	Expanded graphite not less than 98% purity
OUTSIDE TRIM
BOLTING	Material according to EDS			NBO2
SPECIAL REQUIREMENTS	Wetted parts suitable for sour service to NACE MR0175

Notes :

045	END TO END DIMENSION AS FOR GATE VALVE.
280	UNLESS ALL METAL.