| Title : | Piping and Valves | Doc. No. | L-001 | Annex: | E | Valve Data Sheet | BLBT10R |
| Project : | Company : | Rev.Date : | 20.09.99 | Rev. : | 2 | ||
| Valve Type | End To End Standard | End Type 1 | End Type 2 | End Standard | Size From (in) | Size To (in) | Notes |
| BALL VALVE FULL BORE | ASME B16.10 LONG | RF | RF | ASME B16.5 | 0.50 | 8.00 | |
| Notes | ||
| Pressure Rating | CL 300 | |
| Design Code | API 6D OR BS 5351 | 130 |
| Fire Test | API 6FA OR BS 6755 | |
| General Requirement | VSK V244 | |
| Leak Test | VSK V404 | |
| Marking | VSK V003 | |
| Operator | VSK V004 | |
| Max Design Pressure | Barg | 51.1 | 51.1 | 50.1 | 35.0 |
| At Temperature | Deg. C | -46 | 38 | 50 | 100 |
| Subject/Item | Design and Material Requirement | Material | MDS | EDS |
| BODY/BONNET | Split body, bolted | B367 C2 B381 F2 |
T02 T01 |
|
| INSIDE TRIM | |
|
|
|
| PORT | Full bore | |
|
|
| STEM | To achieve hardness/strength use a combination of gr. 2 and 5 materials, or hardfacing by nitriding | B348 | |
|
| CLOSURE MEMBER | Floating ball (solid); To achieve hardness/strength use a combination of gr. 2 and 5 materials, or hardfacing by nitriding | B381 | |
|
| SEATS | Material according to EDS | |
|
NSS1 |
| SPRINGS | |
|
|
|
| SEALS | Lip seal/o-ring design and fire seal or packed gland for stem sealing | |
|
|
| LIP SEAL | Material according to EDS | |
|
NSM1 |
| O-RING | Material according to EDS | |
|
NSM1 |
| FIRE SEAL | Expanded graphite not less than 98% purity | |
|
|
| OUTSIDE TRIM | |
|
|
|
| BOLTING | Material according to EDS | |
|
NBO2 |
| SPECIAL REQUIREMENTS | Wetted parts suitable for sour service to NACE MR0175 | |
|
|
| 130 | DESIGN SHALL ALSO COMPLY TO ASME B16.34. |