Title :	Piping and Valves	Doc. No.	L-001	Annex:	E	Valve Data Sheet	BLBD81R
Project :		Company :		Rev.Date :	20.09.99	Rev. :	3

Valve Type	End To End Standard	End Type 1	End Type 2	End Standard	Size From (in)	Size To (in)	Notes
BALL VALVE NON CONTACT	ASME B16.10 LONG	RF	RF	ASME B16.5	2.00	24.00

		Notes
Pressure Rating	CL 300
Design Code	ASME B16.34
Fire Test	API 6FA OR BS 6755	280
General Requirement	VSK V405
Leak Test	VSK V404
Marking	VSK V003
Operator	VSK V004

Max Design Pressure	Barg	51.7	51.7	51.3	49.2	45.8	42.7
At Temperature	Deg. C	-46	38	50	100	150	200

Subject/Item	Design and Material Requirement	Material	MDS	EDS
BODY/BONNET	Top entry or split body, bolted	A890 J93404 A182 S32750	D56 D54
INSIDE TRIM	Metal to metal sealing. No contact or sliding action between seat and ball during rotation of ball. Sealing by mechanically imposed thrust. No elastomers
PORT	Full bore
STEM		A182 S32750	D54	NIP1
CLOSURE MEMBER	Trunnion mounted ball (solid); For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing	A182 S32750	D54	NHF1 NIP1
SEATS	Seat ring; For sizes 6" and below, use material type 316 SS or Nickel alloy 625, both with hardfacing	A182 S32750	D54	NHF1 NIP1
SPRINGS
SEALS	Packed gland (expanded graphite) or lip seal design and fire seal
LIP SEAL	Material according to EDS			NSM1
O-RING
FIRE SEAL	Expanded graphite not less than 98% purity
OUTSIDE TRIM
BOLTING	Material according to EDS			NBO2
SPECIAL REQUIREMENTS	Wetted parts suitable for sour service to NACE MR0175

Notes :

280	UNLESS ALL METAL.